![]() |
Mixing LECA and Bark?
Hi all,
I have my phals planted in a bark/perlite/charcoal mix right now and have noticed that I get a sort of "layering" effect where the bottoms of my pots remain wet but the middle and top dry out quickly. I'm wondering what you all think about adding LECA to the bottom of the pot and also mixing it with the bark throughout the rest such that the middle/top of the pot is about 75% bark and 25% LECA. My idea here is that the LECA would retain slightly more moisture throughout the pot but since my orchids are accustomed to bark I don't want to switch to full LECA. I just want something that will retain a little more moisture throughout (I water about twice a week currently). I thought about doing sphagnum moss but my experience of it in my environment (Pacific Northwest) is that it gets more soggy than I'd like, especially since I like to do more frequent waterings. I'm thinking the LECA might give me a better moisture balance and keep the environment around the roots airy. We have lots of cool moisture in the air, but inside my house the winter temperature is about 70 F and the humidity level is between 40-50 since my furnace is running (I do use a humidifier if it gets below 50). Thanks for any advice.. this website has been such a great source of info for me! |
Maybe the pots are too big...The medium I use the most is bark+LECA. If I need something more water retentive I mix perlite and coco chips. To the extreme, I mix sphagnum. For rupiculous, only LECA and a layer of sphgnum at the bottom. This works well under my conditions.
Anyway, a layer of LECA at the bottom is always good for drainage. |
Quote:
Oh, and this seems to happen even with smaller pots, although not as much. |
Wht do you want a more retentive mix if the center of the pot is still wet? The solution for your humidity is to water once per week (assuming the pots are made of plastic). If you want to water twice (if you cant resist it ;)) drill some holes on the side of the pot to allow air circulation.
|
Quote:
I was thinking if I add a layer of LECA to the bottom and disperse it throughout mixed with the bark it would disperse moisture more evenly. I am also considering using Orchiata bark. My questions are whether the bark (maybe Orchiata?) and LECA mix is a good idea, and if I should add perlite or charcoal to it. |
A photo or two might help.
|
I know of several commercial growers, who mix small diameter LECA into a mix that is otherwise some combination of bark, charcoal, perlite and/or coconut husk. However, your problem seems to be the layering, than specific mix.
Traditionally (really old school), orchids were grown in clay pots, with a layer of broken pot shards in the bottom (about 1/4 of pot height). This allowed good air circulation, and fairly even drying out. For those genera, that do not require drying out between waterings (Paphs, Phals, Vandaceous, etc.), it also meant that you do have to water more frequently. |
1 Attachment(s)
Here is a photo of one of my phals that I watered 2 days ago. I always water by submerging the entire pot in the water for 5 mins.
I should also mention this was a grocery store purchase that I repotted from sphagnum moss about 3 weeks ago. The roots were okay, but not in the best condition. |
In my humble oppinion, with a temp of 70F and 40<RH<50% you can solve your problem by watering once /week. Nothing more.
Use root color as a reference: green => no water needed / silver=> water it. |
Quote:
|
All times are GMT -4. The time now is 08:46 AM. |
3.8.9
Search Engine Optimisation provided by
DragonByte SEO v2.0.37 (Lite) -
vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.